What Research About Can Teach You

Why Aluminum Wheelchair Ramps is Most Versatile

For disabled people, getting around and climbing up stairs is very challenging. And so, there are lots of wheelchairs ramps that are accessible in several varied sizes or lengths to enable a person in wheelchair to get around quite easily. To learn about these wheelchair ramps, read more here.

People in wheelchairs mostly want to be able to get around just like a normal individual, however they require the help of other people, if not other things; for instance, steps. There has to be a wheelchair ramp so that they can get in and get out.

The aluminum handicap ramp is an all-around system compared to all the rest of the ramp systems. A welded aluminum structure is lighter, but it is stronger as well as more durable, when compared to wood. Such a wheelchair ramp installation can be dismantled or set up in practically all configurations and reused anywhere. The aluminum exterior is nearly maintenance free. Installation is immediate and can be carried out without any building permit because it may be considered an impermanent structure. Aluminum ramp systems ate a most effective option, are free of maintenance, as well as require minimal tools. A foot ramp that measures 24 inches can be fitted in one hour or even less.

An aluminum ramp can be installed temporarily as well as permanently, is reconfigurable and movable. Additionally, such aluminum ramp is tough against salt and snow unlike its wooden counterpart.

With the many different ramps that the market has to offer, a disabled person will be able to negotiate steps as well as get easily across any doorway height. A wheelchair ramp also makes it easy to put in a wheelchair into a vehicle or to take it out.

The basics of wheelchair ramp installation
To comply with ADA standards, wheelchair ramps must have a ramp that measures one foot per inch of rise. Exceptions to such rule are allowed exclusively when there is limited space. For example, steps with a full rise measuring 24 inches must have ramping that measures 24 feet. All ramps that measure above 30 feet needs to have a resting platform halfway. It can either be a straight platform or else a turn platform. The resting platform needs to be at least 60 inches long and similar in width to the ramp that leads up towards it. The minimum measurement of any platform that shifts direction must 60 inches x 60 inches. All wheelchair ramps with a rise beyond 6 inches must have handrails as well as ramps which are longer that than six feet. Handrails must be installed on the two sides of the ramps with unbroken rails on switchback together with dogleg platforms.

For assistance regarding your wheelchair ramp needs, visit National Ramp website and see page .